The Best Car Phone Mount: We Test Phone Holders (2024)

We earn commissions from purchases you make using links in our articles. Learn more.

There are many styles of car phone mount, so we tested them to find the best car phone holder.

The Best Car Phone Mount: We Test Phone Holders (1)

Over the past few years, we’ve tested every possible configuration of the best car phone mounts: CD slot (remember those?), cupholder, dash mount, windshield mount, and vent mount, with clamps, suction cups, magnets, and even elastic.

Why did we test so many phone mounts? Because the majority of those we’ve used have been disappointing. Suction cups fail in cold or heat, dash pads peel off, and vent clips tumble to the floor. Others work, but have drawbacks you won’t notice until you get them into the car, like the Scosche above, which has stayed stuck, but didn’t have enough adjustments to put the phone in a good position and didn’t make the cut.

But using one of the best car phone holders isn’t just convenient—it’s important. Cellphone use accounts for as much as 27% of fatal car crashes, and distracted driving is by far the biggest safety concern among all drivers. Using Apple CarPlay or Android auto with a compatible stereo system, whether factory or aftermarket, still requires you to move your eyes down low on a dash, and even many new cars still lack the capability. Installing the best car phone mount puts your phone higher and closer to your eye level. It still isn’t as good as not using your phone, but it’s the best choice for most people.

Why You Should Trust AutoGuide's Product Reviews

We drive the latest new cars, trucks, and SUVs, but did you also know the team at AutoGuide.com tests tires, waxes, wiper blades, and pressure washers? Before we recommend a product as a top pick in one of our popular product lists, our editors put it to the test. We run through all its features, test the claims that the brand makes about each product, and then give an honest opinion on what we like and don’t like from our personal experience. As experts in all-things automotive, from minivans to sports cars, and from portable jump starters to ceramic coating, we want to make sure you buy the product that’s right for you.

How We Chose the Best Car Phone Mounts and Phone Holders

After looking at user reviews and comparing personal experiences, we purchased the best rated examples of different styles of car phone holder to test. We installed and drove with with all of them to pick the best. Some didn’t make the grade, while at the other end, our Editor’s Pick and #2 choice are equally good, but separated by price and intended use.

For more information on the best phone holders and phone mounts for your car, refer to our table of contents.

The Lisen Magnetic Phone Mount is the first vent mount we've ever tested that really works. Almost all other vent mount phone holders have little arms that attempt to hold on to the vanes in the vent with friction, but the Lisen's ratcheting clamp actually locks into place on your vent. It uses a unique arm with an extending hook on the end that reaches out and grabs the back of a vent vane. You then turn a knob to wind it in, securely holding it in place. The angle adjustment has a similar locking ring, so even heavy phones won't droop.

Like every other magnetic phone mount, you have to stick a steel plate onto the back of your phone. If you have a thin case, you can try putting it inside, but magnetic force drops off sharply with distance, so your phone might slip. Even if you do have it on the outside, it will tend to slide down if you experience a lot of vibration, especially with large phones. Lisen includes a pair of mounts, small and large metal plates, and even prep pads for the adhesive, in a very complete kit. Lisen's instructions are also better than the competition (looking at you, Ram Mounts).

We didn't try, but it seems like you might be able to over-tighten the Lisen and break your vent. There really isn't any reason to, however, because as soon as it's snug, you're done.

Pros

Unique clamp that actually stays in, locking angle adjustments hold an angle

Cons

Can be hard to get your fingers in there to tighten, magnet needs to be stuck to your phone

2. Best Windshield Mount: Ram Mounts Phone Mount

We generally prefer dash or windshield phone mounts, because they keep phones at eye level, and the Ram X-Grip is the best suction cup mount we've used. The suction cup is very large and the base has a twist lock to suck it down hard onto your windshield. A beefy arm has a single knob to lock it into position on both ends, and the phone clamp has spring-loaded arms that you squeeze apart. The arms themselves don't have enough strength to hold a phone vertically, so the Ram Mounts logo in the center is covered with a sticky plastic to keep it from sliding. The Ram Mounts ecosystem is big enough there are both factory and third party accessories, allowing you to change out the base, arm, or end.

Ours came in a plastic bag with no instructions, which we thought might have been a return. But the rammounts.com site describes the packaging as "Poly Bag," so that looks like all you get. There was a tube of glue included as well, and nowhere in the skimpy instructions we found on the site was it mentioned, but we can guess it's intended for off-road (and dirt road) drivers, and extremes of temperature.

We couldn't pull ours off the windshield without unlocking it, and we have no worries about it coming off under any conditions. Because it's all so large and beefy, the Ram Mount is probably best for trucks and larger SUVs. If it didn't cost so much more than the Lisen and take up a lot of room, it would have been our Editor's Pick.

Pros

Lifetime warranty, best suction cup we've ever used, modular, mix-and-match components let you upgrade

Cons

Expensive, warranty doesn't cover the "wear item" suction cup, no instructions, has to be screwed together, takes up a lot of room

3. Best Charging Phone Mount: iOttie Auto Sense Qi Wireless Car Charger

Charging your phone while driving usually means plugging it in, or in new cars with built-in wireless charging, keeping it flat in a slot somewhere. Adding a wireless charging phone mount is a great solution, especially for long trips.

We've had the previous generation of iOttie wireless car phone charger installed in a car for two years now, and it's been great. It swivels at the base and the holder end, the long neck pivots at both ends, and it telescopes several inches, which really lets you put it where you want it. In our case, we have it mounted on the dash, angled down so the phone doesn't block our line of sight but is still easily visible without looking away from the road. The best part is Qi high-speed wireless charging. Wireless to your phone, at least, because you do have to plug in a 12V adaptor and route a cord up your dash to the base unit.

If the iOttie wireless charger works so well, why don't we rank it higher? It's because we really don't like having to glue a pad to the dash for the suction cup. We've done this before, and there is always residue when you remove the base plate, no matter what. Our has also fallen off a couple of times, once when the temperature was below 0°F, and once when it was around 100°F. Depending on where you stick it, the long arm can vibrate, especially if it's stuck to a padded dash. It's still by far the best of several similar charging phone holders that we've used.

Pros

A good mount with Qi fast wireless charging, lots of adjustment options

Cons

Long arm gets wobbly, suction cup can release in extremes of temperature, as expensive as the Ram Mount

The Nite Ize Steelie is about as good as a squeeze-style vent clamp gets. Rather than just pressure fit, like then Spigen, there's a little locking lever arm which you use to clamp the jaws together onto a vent vane. They have an anti-slip coating on them which does an OK job of holding onto vents, but isn't strong enough for big, heavy, flagship phones.

The ball and socket magnet is very clever. It's strong enough we never worried about the phone falling off, and it lets you mix and match Nite Ize attachments instantly. However, because it's smooth enough to rotate easily, it's also smooth enough to droop. The phone holder also has problems. In order to reach the release levers, you either need to position your phone very high so they stick out the bottom; or pull the whole thing off the magnet every time. That's one more step than any other phone holder we tested.

You could easily change the vent base to Nite Ize's suction cup windshield mount, which would solve the vent clip problem, but it will probably still droop over bumps with a heavy phone.

Pros

Very small and easy to install, lots of different Nite Ize accessories

Cons

You have to attach the phone holder separately each time, tends to droop and slide

If you have a smaller phone and want a compact, easily removeable car phone mount, the Spigen Kuel might work for you. It's about as simple a design as you can have. The back has four spring-loaded jaws with an anti-slip coating that go over the vent vanes. The front contains a magnetic pad, and that's all there is. There are no adjustments, so aside from the jaws, it's just one solid piece. Like other magnetic phone holders, you have to stick a steel pad to your phone or slip one inside the case, but as we mentioned with the Lisen, you'll have the best results with the plate directly against the magnet.

We had trouble with the Spigen. It's very low profile, almost flat, so if your vents are recessed (like in the Mazda we tested it on), you'll have trouble arranging the phone so it sticks. With no adjustment, the only thing you can do is swing your vent left and right. For us, between the two it left our phone pointed up at an angle we didn't like. It was usable, but not very convenient.

We also didn't think either the arms or the magnet were strong enough. We cleaned our vents thoroughly with our favorite cleaner so there wouldn't be any dust or grease, and it still slowly slipped off with a Galaxy S10+ attached. The magnets weren't as strong as the Lisen, either.

If you have a smaller phone and want the slimmest and least noticeable phone holder available, not to mention one of the cheapest (it was $14 on eBay at time of publication), the Spigen Kuel will be fine. If you have a flagship phone, or drive on rough roads, we recommend either then Lisen, Ram Mount, or iOttie.

Pros

Takes moments to install, very small, easy to remove and move

Cons

Neither magnet base grip hard enough for large phones

PopSockets were everywhere about four years ago, but we really haven't thought about them since. The basic idea is you stick the PopSocket onto the back of your phone, and when you don't need it, you squish it flat. When you do, you pop it out. Now there's an entire ecosystem of PopSocket accessories, including a big variety of car mounts like the highly-rated PopMount 2. And if you don't like the PopSockets brand, there are plenty of compatible third-party options.

As we aren't using PopSockets, we turned to our forum users for their opinion: "I've been very happy with the basic PopSocket mount," said Onestone on rav4world.com. "It has a double-sided adhesive that holds well but won't leave residue on your dash if you decide to take it off." Msmith on swedespeed said, "That's the same one I have and love it...Doesn't interfere with anything." Dixon12 agreed: "Popsocket made stuff is better quality."

It's one of the few phone mounts that pay any attention to appearance, too, coming in two colors, with a distinctive ring design and very thoughtful cord grips for charging. Reviewers on Amazon gave it a good 85% positive rating, and mentioned it should either be stuck to a flat dash base, or used on the windshield.

Pros

A great option if you're already into PopSockets, lots of thoughtful touches, windshield or dash mount

Cons

Requires PopSockets, doesn't stick well to dash boards without a base plate, styling not for everyone

What is a Phone Mount or Phone Holder and Why Do I Need One?

Distracted driving has increasingly become more dangerous in recent years as we try to always stay connected, even when we're behind the wheel. Even if you have no urge to text while driving, you may need to use your smartphone for other reasons such as playing music or navigating to your destination. Or maybe you're a driver for a ridesharing company such as Uber or Lyft and need to keep your eye on your phone from time to time.

That's where a phone mount or phone holder comes in handy. They're extremely affordable and a small price to pay to keep you safe while on the road. The ideal phone mount or phone holder will position your phone in a convenient location, allowing you to quickly glance on it when necessary, or change to the next track in your playlist without taking your eyes off the road.

What Are the Different Types of Car Phone Mounts and Phone Holders

Before choosing the right car phone mount or phone holder, you need to see which type of holder works for you. There are three main types of phone holders:

Dashboard/Windshield Mount

This holder makes use of a suction cup for mounting on to any surface of your car. Attaching the holder to a surface of a car can provide an easy setup, but the holder itself and your phone will most likely obstruct your view outside the car.

Suctions cups also make round prints on the surface of windshields. That’s why most products come with a thick solution for situations where you will be mounting the holder to a dashboard. They also warn their users about the fact that the solution can also cause damage to your car’s surfaces.

Air Vent Mount

Unlike the dashboard/windshield mount’s suction cups, an air vent mount has rubber arms that clamp on to the vanes of your air vents. These mounts are compact and easy to use without worrying much about damage to any surface of your vehicle.

That said, in cases where you like to use the hot air during the winter season, the holder will likely overheat your phone, which can result in a shutdown. You should also be aware that, since phone models are now much bigger than before, using these mounts can cause issues since they can be harder to hold and grip.

CD Slot Mount

This holder is not as popular as the other two. Although many car models still come with a CD player, people don’t really use it since they now have their smartphones or tablets for entertainment while traveling. This actually makes the CD player an ideal place to mount your phone.

The mount comes with rubber plastic flaps that fit into the CD slot. These wings are then opened with the use of a thumbscrew. It should be noted that users who rely on CDs while have to give up on using them in their cars with these mounts.

Cupholder Mount

Cupholder mount phone holders have a cup-shaped insert that fits into a cupholder, and a long arm extending up to the phone holder. This lets you position the phone close to other controls on your dash, and doesn't block either your vents or windshield. Most of them still keep the phone lower than we like for safety, and you'll tend to see a lot of vibration as the arm wiggles around on rough roads.

Recent Updates

December 12, 2022: Added a promoted product recommendation.

December 8, 2022: Awarded Editor's Pick to Lisen Phone Holder after testing. Added Ram Mounts, iOttie Auto Sense, Spigen, Nite Ize, and Pop Sockets to recommendations. Removed Beam Electronics, EXSHOW, and SOAIY brands.

December 6, 2022: Removed MPow, Iottie Easy One Touch 2, Busanoy, Soaini, Macally; not available or poorly rated.

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.

AutoGuide may accept review samples for testing and evaluation. Suppliers of review products do not have any input into our conclusions and are not allowed to review our content before publication.

The Best Car Phone Mount: We Test Phone Holders (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Mr. See Jast

Last Updated:

Views: 6207

Rating: 4.4 / 5 (55 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Mr. See Jast

Birthday: 1999-07-30

Address: 8409 Megan Mountain, New Mathew, MT 44997-8193

Phone: +5023589614038

Job: Chief Executive

Hobby: Leather crafting, Flag Football, Candle making, Flying, Poi, Gunsmithing, Swimming

Introduction: My name is Mr. See Jast, I am a open, jolly, gorgeous, courageous, inexpensive, friendly, homely person who loves writing and wants to share my knowledge and understanding with you.